English
简体中文
ChinaWear and consumption of submersible pumps is inevitable during use. If you want to extend its service life, the direct way is to reduce energy consumption. The following are ways to reduce the energy consumption of products, I hope it can help you:
1. For the damage of the submersible pump bearing: the treatment method is to check and repair or replace the bearing.
Second, the liquid density of the submersible pump increases: the treatment method is to check the liquid density.
3. The pump shaft is bent: the treatment method is to correct the pump shaft.
4. The mechanical seal of the submersible pump is too tight or dry friction: the treatment method is to properly relax the pressure on the contact surface of the dynamic and static rings.
5. The impeller and the wear-resistant ring, the impeller and the shell are worn, and the treatment method is to check and repair.
We know that although many factors may increase the energy consumption of submersible pumps, if we can fully recognize these factors and start from the maintenance of product parts, operating environment and daily maintenance, it will be able to greatly reduce its energy consumption, thereby extending its service life.
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75 "Q submersible pump")
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75 "QD submersible pump")
